RAM Adjusted Desktop Starter (rads)

From Kicksecure
Jump to navigation Jump to search

rads - Starts [no] desktop environment based on available RAM. Automatically boots into graphical desktop environment, when there is enough RAM. Or into terminal-only, when there is too little RAM. Useful inside virtual machines.

rads Default Settings[edit]

When booting up, a prompt will appear offering to prevent Xfce from starting. Users can also manually press Ctrl + C for the same effect.

By default, Kicksecure VMs are configured with 1280 MB virtual RAM. This can be reduced on systems with low available resources.

  • If total RAM is more than 512 MB, the default desktop environment (Xfce) is started.
  • If total RAM is less than 512 MB (for example, the minimum 256 MB RAM requirement), Xfce is not started.

Users with low RAM resources should find this convenient because Kicksecure RAM can be reduced to 256 MB and still function.

Further, if something needs configuring or checking, 512 MB RAM can be assigned to automatically boot into the graphical Xfce desktop. Additional settings are available in folder /etc/rads.d to configure this feature: additional RAM can be added (but still not choosing to boot into a desktop environment), different display managers can be used and so on. See file /etc/rads.d/30_default.conf for configuration examples.

It is possible to prevent a desktop environment from automatically starting, regardless of how much RAM is independently assigned.

In the terminal complete the following steps.

1. Open file /etc/rads.d/50_user.conf in an editor with root rights.

Kicksecure

This box uses sudoedit for better security.

Kicksecure for Qubes

NOTE: When using Kicksecure-Qubes, this needs to be done inside the Template.

Others and Alternatives

  • This is just an example. Other tools could achieve the same goal.
  • If this example does not work for you or if you are not using Kicksecure, please refer to this link.

sudoedit /etc/rads.d/50_user.conf

2. Add the following content.

rads_start_display_manager=0

3. Save the file.

4. Done.

The procedure is now complete.

See Also[edit]


Unfinished: This wiki is a work in progress. Please do not report broken links until this notice is removed, use Search Engines First and contribute improving this wiki.

We believe security software like Kicksecure needs to remain Open Source and independent. Would you help sustain and grow the project? Learn more about our 12 year success story and maybe DONATE!